What Should You Know About Belkin N300 Wireless Router?

Are you suffering from wireless connectivity issues? If yes, then it could be because of the limited range of your wireless network. It might lead to disconnecting or slowing down of internet speed whenever you move away from the range of Wi-Fi. In such situations setting up the Belkin range extender can solve the purpose.  

Belkin range extender repeats the signals of wireless network and thus gradually increases the range of wireless network. If makes the wireless experience better by offering good signal strength at each and every corner of your premises. No matter whether you are going upstairs/ down or moving from one corner to another corner of your premises. It will allow you to enjoy an uninterrupted wireless internet network range. So if you looking to make the Belkin range extender a part of your wireless equipments then here we have Belkin WiFi Extender Setup procedure for you.

Steps for setting up Belkin WiFi range extender:

• Pre-requisites for setup:

• You must have a Belkin range extender.
• An already setup wireless network along with the details of network name and passkey. Kindly check if you have a dual band router then try to secure your SSID as well as WiFi passwords for both the network bands labeled as 2.4 GHz and 5 GHz.
• A wireless network supporting device. It can be any of the computers, smart phones, tablets, etc.

• Setup procedure for Belkin WiFi Range Extender:

• Connect your belkin range extender to any of the power outlets that is placed within the range of your pre-existing WiFi network.
• Open any of your wireless network supporting devices and try to search and get connected with Belkin.Setup N300 network.
• In case you are unable to locate the network named as Belkin.setup then try to restart your Belkin range extender. You can do this by simply holding down the reset button on your range extender for a minimum of 10 seconds.
• Wait for your WiFi extender to come back online again. Once it’s back online try again to connect with Belkin.setup network.
• If it shows connecting to the network then wait until the connection becomes stable.
• Once, it gets connected with the network visit http://belkin.range through any of the web browsers on your WiFi supporting devices. In case you wish to view the web-based setup for your WiFi extender then type http://192.168.206.1 as a URL in your web browser and press enter or go.
• After the setup page opens, click on the option to “Get Started.” It will now try locating your router’s SSID.
• Choose any of the wireless networks whose range needs to be extended. After selecting the corresponding WiFi network click on the option for “Next” and wait till it gets connected. In case you are unable to locate the WiFi network then click on “Refresh” to view the updated list of available wireless networks.
• In case, you encounter a dialog box asking for your network password then enter the authentication details linked to that network and click on “Next.” Wait till the system verifies network authentication details.

Soon as the details get verified the range of that selected network will get extended. This set up procedure was for single band network but in case you wish to extend the range of dual band network, then try to repeat the whole procedure once again. The range for your dual band network will also be extended by following same steps.

Kindly remember that in case of single band Belkin range extenders only 2.4 GHz band will be detected.

Also, if in future you wish to review or make any changes to these settings then click on the option for “Edit” or “Create Extended Network.” If in case you find any issue while doing the setup then feel free to get support for Belkin N300 WiFi Range Extender.